Acronis Manuals, True Image User Guides, Tutorials

Looking for:

Acronis True Image Coupon 70% Off and New Features Review

Click here to Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Acronix takes abuse arconis its amnual very seriously. We’re committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we’ll investigate it and take the appropriate action. We’ll get back to you only if we require additional details or have 22010 information to share. For example, Anti-Semitic content, racist content, or material that could tree in a violent physical act.

For example, a credit card number, a personal identification number, or acronis true image home 2010 manual .pdf free unlisted home address.

Note that email addresses and full names are not considered private information. You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive. If you have not received an email with the manual within fifteen minutes, it acronis true image home 2010 manual .pdf free be that you have acronis true image home 2010 manual .pdf free entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

Would you like to receive an email when new answers and questions are posted? Please enter your email address. Acronis True Image Home Manual. Get this manual by email Other manuals of this product. Need help? Post your question in this forum.

All rights reserved. Linux is a registered trademark of Linus Torvalds. All other trademarks and copyrights referred to are the property of their respective owners. Distribution of substantively modified versions of this document is prohibited .pff the explicit permission of the copyright holder. Distribution of this work or derivative work in any standard paper book form for commercial purposes is prohibited unless prior permission is obtained from the copyright holder.

The license terms for such thirdparties acronis true image home 2010 manual .pdf free detailed in the license. Acronis True Image Home is an integrated software suite that ensures the security of all of the information on your PC.

It can back up the operating system, applications, settings and all of your data, while also securely destroying any confidential data you no longer need. With this software, you can back up selected files and folders, settings and 200 of Microsoft e-mail clients — or acrknis the entire disk drive or selected partitions. Acronis True Image Online will allow frew to store your most important files on a remote storage.

Your data will be protected even if your computer is lost, stolen or destroyed. Acronis Nonstop Backup continuously saves changes in your system and files, as often as every five minutes, so you can rollback easily to any point in time if needed.

With such integration you can acronis true image home 2010 manual .pdf free for viruses the data to be backed up while running a backup task. If a virus or other malware is found, the backup is aborted. You can disinfect the data using Acronis Internet Security and then repeat the canceled backup. Acronis Backup and .pff might be unavailable in your acrojis. Should manuual disk drive become damaged or your system attacked by a virus or malware, you can recover the backed up data quickly and easily, eliminating hours or days of work trying to rebuild your disk drive’s data and applications from scratch.

Acronis True Image Home provides you with all the essential tools to recover your computer system should a disaster occur, such as losing data, accidentally deleting critical files or folders, or suffering ture complete hard disk crash. If failures occur that block access to information or affect system operation, you will be able to recover the system and the lost data xcronis.

The unique technology developed by Mmanual and implemented in Acronis True Image Home allows you to perform exact, sector-by-sector disk backups. This includes backups of all operating systems, applications and configuration files, personal settings, and data.

Acronis Ffree Image Home helps you protect your identity as well. Simply deleting old data will not remove it permanently from your computer. You can store backups on almost any PC storage device.

Windows-style interface and wizards will make your work easier. Just perform a few simple steps and let Acronis True Image Home take care of acronjs else!

When a system problem occurs, the software will get you up and running in no time. It is purchased separately, has a separate license, and is installed from its own setup file. Dynamic disks offer greater flexibility for volume management and may provide benefits in computers with more than one hard drive. Acronis Universal Restore lets you restore an image of a Windows operating system to a different hardware environment.

You can restore information on independent computers regardless of the hardware used on the independent computer. This may come in handy, for example, after replacing a damaged motherboard or when deciding to migrate your system from a desktop to a acronis true image home 2010 manual .pdf free.

For more information see Acronis Universal Restore p. To be able to create or modify PE 2. For more information see Creating WinPE-based rescue media p. Backup and recovery Backup refers to the making copies of data so that these additional copies maunal be used to recover the original after a data loss event. The first is to restore a state following a disaster manal disaster recovery.

The second is to recover small numbers of files after they have been accidentally deleted or corrupted. Acronis True Image Home freee both by creating disk or partition images and file-level backups respectively. By default, Acronis True Image Home stores an image of those hard disk sections that contain data for supported file systems.

However, trye can select an option that acronis true image home 2010 manual .pdf free you include an image of all of the sectors of a hard disk a sector-by-sector backup.

When you back up files and folders, only the qcronis, and folder tree, are is compressed and stored. If the need arises, you will be able to recover both your system disk state and individual files. Backup versions Backup versions are the file or files created during each backup operation. If you do not use consolidation feature, the amount of versions created is always equal to the amount of times the backup is executed or to the amount majual stored points in time.

So, a version represents a point in time to which the system or data can be recovered. To put it another way, backup versions represent full, incremental and differential backups – see Full, incremental and differential backups p. There is acronis true image home 2010 manual .pdf free more type of incremental backup version.

If you mount a partition in the read-write mode, the program assumes that the mounted image will nanual modified and creates an incremental version to capture the changes.

This type of incremental version has somewhat different properties. For example, it cannot be consolidated. The backup versions are similar to file versions. The file versions concept is familiar to those who use a Windows Vista and Windows 7 feature called “Previous versions of files”. This feature allows привожу ссылку to restore a file as it existed on a particular date and time.

Acronnis backup grue allows you to recover your data in a similar way. This could be useful when trying to find damaged or deleted files. Simply browse through the backup versions in the Acronis Backup Explorer until you find the backup version containing the required files. Additionally, you can recover different saved versions of the found files.

Disk cloning This operation migrates or copies homme entire contents of imqge disk drive to another disk drive. This may be necessary, for example, when installing a larger disk. The result is two identical drives with the same file structure. The “Disk Clone” tool effectively copies all of the contents of one hard disk drive onto another hard disk drive. The operation allows you to transfer all the information including the manua, system and installed programs from one hard disk drive to another without having to reinstall and reconfigure all of your software.

If you decide to use cloning, the best 2013 download free for download office ms crack 10 windows of success is to remove the existing drive from the computer mnaual install the new drive in its place. It should be connected in exactly the same перейти as the old drive. Acronis True Image Home does not provide for cloning a single partition.

Ikage can only clone the entire drive. You can also transfer all the information from your hard disk drive to another one by backing up the entire old hard disk and then recovering the backup to the new disk. Rebooting the computer is not necessary. Once the program starts the partition backup process, it temporarily freezes all the operations on the partition and creates its “snapshot”.

Snapshot creation usually takes just several seconds. After that, the operating system continues working as the imaging process is under way. The Acronis driver also continues to keep the нажмите для продолжения view of the partition.

Whenever the driver sees a write operation directed at the partition, it checks whether these sectors are already backed up. If they are not, the driver saves the data on the sectors to be overwritten to a special buffer.

Overwriting will then proceed. All of the partition sectors of the point-in-time will be backed up intact как сообщается здесь an acronis true image home 2010 manual .pdf free “image” of the partition will be created. Backup file format Acronis True Image Home usually saves acroonis data in the proprietary tib format using compression. This reduces the amount of needed storage space.

It also allows for backward compatibility with the previous Acronis True Image Home version. When creating a tib file, the program calculates checksum values for data blocks and adds these values to the data being backed up.

These checksum values allow for the verification acronis true image home 2010 manual .pdf free data integrity.

 
 

Acronis true image home 2010 manual .pdf free

 

Note that you cannot set the state by clicking the check box, but you can change it to a cleared or selected state. Selecting a disk, partition, file or folder to make it the current item in a list does not mean selecting it for recovery!

The majority of user interface elements located on this tab are described in the Disks and partitions tab p. Here we describe the items specific for the tab. When you click an item, short information on this item is displayed under the browser area. The set of displayed parameters depends on the item’s type. Clicking the View versions link opens the View Versions window with a list of all versions of the file in the backup.

You can recover a desired version by its backup time. By double-clicking on a file in the right-hand area, you will recover the file to a temporary folder. Then Acronis True Image Home will open the file using the associated application. The time line provides easy navigation through backup versions and allows you to recover your data to the state it was in at a certain date and time.

If you click the My backups link in the main window, the time line will show all of the backups you have. You can also display all of your backups by choosing the My backups item from the drop down list in the Navigation field. To open the list, click the arrow icon to the right of Home in the Navigation field. The squares that represent backup versions have colored stripes at the bottom. The picture below shows various states of a time line. Its states vary depending on the number of backups and the time interval through which you are navigating.

The “Now” interval shows backup versions created during the last hour. When using Nonstop Backup, backup versions may be created as often as every five minutes The “Today” interval shows backup versions created from the beginning of the current day to the last hour.

The “week” interval can be named either “Week ago” or “This week”. When today is Monday, Tuesday or Wednesday, the “week” interval is named “Week ago”. In such cases, the time line shows backup versions created during the previous week and from the beginning of the current week to the beginning of today. In such cases the time line shows backup versions created from the beginning of the current week to the beginning of today.

The “month” interval can be named either “Month ago” or “This month”. When today is any date from the 1st to 15th day of the month, the “month” interval is named “Month ago”.

In that case the time line shows backup versions created during the previous month and from the beginning of the current month to the “week” interval. In that case the time line shows backup versions created from the beginning of the current month to the “week” interval.

The “Older” interval shows backup versions created from earlier than the beginning of the current year. Working with time intervals and backup versions Time intervals may be expanded when the number of backup versions fits onto the time line or folded into a square “block”.

When a time interval is expanded, the squares representing backup versions may contain a “warning” or “error” icon. Such an icon indicates that warning s or error s have been written into the Log during version creation. If more than one backup version has been created during a day within “week”, “month”, “year”, or “older” time interval, such a date is shown on the time line using a special “version pack” icon.

If you hover over a folded block for more than half a second, a balloon will show the information about the time interval start, its end, and the number of backup versions it contains. If you hover over a backup version within an expanded time interval, a balloon will show more detailed information about the backup version. Clicking on a folded block or its name above or below the time line expands the corresponding time interval.

If the number of backup versions within the time interval is too big to fit onto the time line, the horizontal scroll line allows you to navigate through the backup versions within the time interval. If you select another folded block and there is no room for displaying all backup versions of the newly expanded block, then the current expanded block will collapse.

By clicking on a backup version, you select it in the Backup Explorer. Shortcut menus Right-clicking on the time line opens the shortcut menu. The menu contents will change depending on the selected item. The appropriate commands are available in the View submenu. The View submenu is opened by right-clicking on a backup version or by right-clicking on time line’s free space. Such merging allows you to get the most out of your computer.

The new user-friendly interface makes starting backup and recovery much faster. When you have created backups, the Backup and Restore window will show the Nonstop Backup box and the box of your oldest disk or partition backup.

Furthermore, the Start menu acquires the following Acronis True Image Home items: These menu items allow you to use the main program features, tools, and utilities without starting Acronis True Image Home In such a case, you will be able to manage your backups without running Acronis True Image Home To open the window, in Windows Explorer, right-click the required file or folder, and then click Properties.

The Acronis Recovery tab allows you to view and recover versions of the selected file or folder. If you rename a file or folder protected by Acronis Nonstop Backup or included into a regular backup, the versions of the renamed item on the Acronis Recovery tab will disappear. They may reappear after certain time. This section lists some frequently used tasks and provides links to the appropriate parts of the User’s Guide.

They allow you to back up your disks partitions , files, and e-mail. You can choose a backup feature that suits you most or use them all. The below sections describe the backup features in more detail. When you back up files and folders, only the data and folder tree are compressed and stored. Acronis True Image Home stores a sector-by-sector snapshot of the disk. This includes the operating system, registry, drivers, software applications data files, and system areas hidden from the user.

By default Acronis True Image Home stores only the hard disk parts that contain data for supported file systems. Furthermore, Acronis True Image Home does not back up swap file information.

It will not back up pagefile. This reduces image size and speeds up image creation and recovery. However, you can still use the Back up sector-by-sector option that lets you include all of the sectors of a hard disk in an image.

A partition image includes all files and folders including hidden and system files , boot record, and FAT file allocation table.

It also includes files in the root directory and the zero track of the hard disk with the master boot record MBR.

By default, files in all Acronis True Image Home backups have a “. This extension should not be changed. To do so, mount the image as a virtual disk see Mounting an image p.

It forms a base for further incremental or differential backups. It can also be used as a standalone backup. We suggest you to choose one of the following three approaches of using the backup methods: “Full” – A standalone full backup might be an optimal solution if you often roll back the system to its initial state or if you do not like to manage multiple files.

Having created a full backup once, if you then create an incremental backup each day of a month, you will get the same result as if you created full backups every day. Incremental images are considerably smaller than full or differential images. Such a backup scenario may consist of a weekly full system backup with intermediate, daily backups that cover data that was changed since the LAST backup. This scenario, while requiring less storage space and time for the daily backups, will require more work on your part to provide recovery after a system crash.

It is also good when the conditions are intermediate. Each differential backup includes all the files changed since the last full backup. It takes less time and space than “Full”, but more than “Incremental”.

The good thing is that recovering is simpler than for 2 – you’ll have to recover the last full backup and the last differential backup. Examples and recommendations To choose a desired backup method, you need to configure a custom backup scheme. For more information see Custom scheme p. You can choose any approach for each of your backup projects according to their size and frequency of file modifications.

For example if almost all the included files appear changed before an incremental backup starts, the incremental backup will be almost of the same size as a full backup would be.

If so, let it be “Full” to simplify the recovery. While this scheme takes up progressively more storage space as each new day of the week passes, a recovery would only involve two backups – the last FULL backup followed by the previous day’s differential backup. Many users prefer this method as it simplifies recovery and most backups are done overnight.

In these examples, the only differences in the two backup scenarios are: Incremental backups require less storage space while differential backups require more. Incremental backups require all of the backups used for that week in order to do a complete recovery, while the differential backup only requires a maximum of two backups at any given time.

An incremental or differential backup created after a disk is defragmented might be considerably larger than usual. This is because the defragmentation program changes file locations on the disk and the backups reflect these changes. Therefore, it is recommended that you re-create a full backup after disk defragmentation. If you lose an incremental backup version or it becomes corrupted, all later incremental backup versions will be unusable.

Deleting backups and backup versions You may want to delete backups and backup versions you no longer need. Acronis True Image Home stores information on the backups in a metadata information database. Therefore, deleting unneeded backup files by using Windows Explorer will not delete information about these backups from the database, and Acronis True Image Home will consider that they still exist.

This will result in errors when the program tries to perform operations on the backups that no longer exist. So you must only remove obsolete backups and backup versions by using the tools provided by Acronis True Image Home To delete an entire backup: On the main screen, find the corresponding backup box, click Operations, and then click Delete backup.

When you delete an entire backup, all its versions will be deleted as well. To delete a specific backup version: 1. On the main screen, find the corresponding backup box, click Explore and recover or Explore all versions. In Backup explorer, right-click the version you want to delete, and then click Delete version. When you delete a backup version, please remember that this version may have dependent versions.

In this case the dependent versions will be deleted as well, because data recovery from such versions becomes impossible. If the disk has several partitions and you want to back up the whole disk, click Switch to disk mode and then select the disk’s check box.

To return to the partition selection, click Switch to partition mode. Of course, you can also schedule the backup, change the default backup options, exclude files and folders from backup. To configure the backup, click the appropriate links. The below steps describe how to configure a backup using most of the available image backup settings. Select a partition s to back up by selecting its check box. You may exclude certain files and folders from backup. For example, you transferred some movies from your DVDs to a folder on the data partition.

They occupy quite a lot of space and it doesn’t make sense to back them up because you have the DVDs. To exclude the folder, click the Add link to the right of Exclusions and add the folder to the excluded items list. Select a destination for backup you can leave the default destination when it suits you or browse for a destination after clicking the down arrow to the right of the current destination and selecting Browse Selecting the check box will result in creating a bootable recovery environment on the removable media and adding a standalone Acronis True Image Home version.

You will be able to run Acronis True Image Home from the removable media on a bare-metal system or the crashed computer that cannot boot. If possible, avoid storing your system partition backups on dynamic disks, as the system partition is recovered in the Linux environment. Linux and Windows work with dynamic disks differently. This may result in problems during recovery. If you need the backup to run on a schedule, click the link to the right of Schedule, turn on scheduling and set the required schedule.

You can also change the default backup scheme by clicking on the appropriate link. For more information see Backup schemes p. If you would like to assign a specific name to the backup, type the name in the Backup name field instead of the default one. You can also add useful information to the backup name. To do so, click the down arrow to the right of the destination and click Browse Click Disk backup options to set the options for the backup being configured.

For example, when your data disk contains sensitive information, you may want to protect the information by encryption. You can also choose to validate the backup immediately after its creation, though it can be done later.

For more information see Backup options p. When you set up the backup as needed, you can run it immediately by clicking the Back up now button. If you want to run the backup later or on a schedule, click the down arrow to the right of the Back up now button and select Later in the drop down list to save the settings you have made. This will open the File Backup window. Let’s consider how to use this backup type for backing up a folder. Select the folder on the directory tree in the What to back up area.

The right side will show the folder contents with all the files and subfolders selected. There you can unselect the files you do not need to back up, if any. Select a destination for backup you can leave the default destination or browse for a destination after clicking the down arrow to the right of the current destination and selecting Browse Leaving the check box selected will result in creating a bootable recovery environment on the removable media and adding a standalone Acronis True Image Home version.

You will be able to run Acronis True Image Home from the removable media and recover the backed up data even on a crashed computer that cannot boot. By default the program will assign the name of the folder to be backed up to the backup, but if you would like to assign another name, type the name in the Backup name field. Click the Back up now button if you want to run backup immediately. You can also delay the start of backup for up to 6 hours by clicking the down arrow to the right of this button and selecting a delay interval from the dropdown list.

When you need to change the default backup options, click File backup options and set the options you require. If you want to run the backup on a schedule, click the Turn on link to set up a schedule for more information see Scheduling p.

To run the backup on the schedule, click the down arrow to the right of the Back up now button and select Later in the drop down list.

The backup with the settings you have made will run according to the schedule. You can also start the backup manually later on the main screen. The program allows you to back up files by categories. For more information see Data categories p. You can exclude hidden or system files and folders from backup, as well as files matching the criteria you specify.

To add exclusion criteria, click the Add link to the right of Exclusions. While adding criteria, you can use the common Windows wildcard characters. For more information see Excluding items from backup p.

When selecting the file category ies , you automatically select for backup all files of associated types found on the computer’s hard drives. Furthermore, you can add any number of custom categories containing files and folders. The new categories will be saved and displayed along with the above. You can change the contents of any custom or default file category edit the category or delete it.

The default file categories cannot be deleted. To change the default name of a custom category, double-click the name and enter a new one. Select the data source e. By default the new category will contain All data from the source, but you can apply filters to select the specific types of files that you wish or do not wish to back up. To set a filter, select its type: Only the following file types or All data except the following file types.

You can add file types for the selected filter by entering their extensions in the appropriate field one at a time and then clicking Add. The added file types appear in the window below.

For example, you can back up files to a USB stick and retrieve these backed up files on your notebook at home without installing Acronis True Image Home This is true because the most widely used operating systems Microsoft Windows and Mac OS X have built-in support of the zip file format. Please note that built-in support of zip files in Windows does not cover operations with multivolume zip archives, and zip backups exceeding 4GB in size or which contain files of more than 4GB each.

The Zip format is available when backing up files, folders or when making reserve copies of your backups. You can schedule backups, validate zip backups, recover files and folders from zip backups, make incremental and differential backups, etc. However, it does not provide password protection and encryption. Acronis True Image Home can recover and validate only its own zip backups.

If a zip archive was created by a file archiver program, it cannot be recovered and validated by Acronis True Image Home E-mail backup is a subset of file-level backups that backs up predefined folders and requires minimum user selections.

However, if need be, you can select Microsoft Outlook components and folders individually. This means that you can back up folders stored on a mail server. Take note that Acronis True Image Home does not support Unicode characters in the items backed up using the E-mail backup type. To back up your E-mail: 1. Click E-mail backup on the main screen. This will open the E-mail Backup window.

Select the mail items you want to back up in the What to back up area. The right side will show the item contents with all subitems selected. There you can unselect the subitems you do not need to back up, if any.

The program will assign a default name to the backup, but if you would like to assign another name, type the name in the Backup name field. Note that you will have to specify your Windows account name and password.

This is done for confidentiality reasons. The program will back up only the e-mail messages and settings related to the specified account.

E-mail data of all other accounts will not be backed up. Enter the password in the appropriate field. If you do not enter the password or enter an incorrect password, the program will notify you that the credentials are not valid.

When you need to change the default backup options, click E-mail backup options and set the options as required. The backup where you have made the settings will run according to the schedule. It allows you to recover entire disks, individual files and their different versions. If you choose to protect an entire partition, you will be able to recover the partition as a whole using the image recovery procedure.

You cannot use Acronis Nonstop Backup for protecting data on external hard drives. How it works Once you start Acronis Nonstop Backup, the program will perform an initial full backup of the data selected for protection. Acronis Nonstop Backup will then save changes in the protected files including open ones every five minutes, so that you will be able to recover your system to an exact point in time.

Usually the different states of the protected data will be backed up at 5-minute intervals for 24 hours. The older backups will be consolidated in such a way that Acronis True Image Home will keep daily backups for the last 30 days and weekly backups until all Nonstop Backup data destination space is used. Note, that if Acronis Nonstop Backup protects a non-system partition and no changes have occurred for 5 minutes since the last backup, the next scheduled backup will be skipped.

Acronis Nonstop Backup will wait for a significant data change and will create a new incremental backup only when such change has been detected. In those cases, the actual time interval will exceed 5 minutes. In addition, if, for instance, you are working in Word and do not use the “Save” operation for an hour, changes in the Word document will not be backed up every five minutes, because Acronis True Image Home checks file changes on the disk and not in the memory.

The consolidation will be performed every day between midnight and AM. The first consolidation will take place after the Nonstop Backup has been working for at least 24 hours. In this case the first consolidation will be performed between and AM on July Then the program will consolidate the data every day at the same time.

If your computer is turned off between and AM, the consolidation will start when you turn the computer on.

If you turn off Nonstop Backup for some time, the consolidation will start after you turn it on again. You may think that at these backup rates the storage will fill in no time. Do not worry as Acronis True Image Home will back up only so called “deltas”. This does not mean that entire changed files will be backed up, but only differences between old and new versions.

For example, if you use Microsoft Outlook or Windows Mail, your pst file may be very large. Furthermore, it changes with each received or sent E-mail message.

Backing up the entire pst file after each change would be an unacceptable waste of your storage space, so Acronis backs up only its changed parts in addition to the initially backed up file. To protect your data continuously: 1. Click Nonstop Backup on the main screen.

This will open the Nonstop Backup window. Select on the directory tree in the What to back up area an item to be protected by Nonstop Backup. The right side will show the item contents with all the files and subfolders selected. There you can unselect the files you do not need to protect. If you need to protect more items, just continue selecting items on the directory tree in the same way.

Select a destination for nonstop backup you can leave the default destination or browse for a destination after clicking on the current destination and selecting a suitable destination from the dropdown list. For more information on selecting and managing Nonstop Backup storage see Acronis Nonstop Backup storage p.

The Nonstop Backup will get a default name, but if you would like to assign another name, type the name in the Backup name field.

Click the Start now button to start protecting the selected data immediately. If you click the Start now button when the Try mode is turned on, the program will display a message that Nonstop Backup cannot start while you are working in the Try mode.

You can exclude from protection files that match the criteria you specify. Incidentally, you can change the Nonstop Backup settings any time. To do so, click Edit Nonstop Backup settings on the main screen. Save the edited Nonstop Backup settings by clicking the Save button and Nonstop Backup will immediately start working with the new settings. If you have sufficient storage space, Acronis Nonstop Backup can simultaneously protect more than one partition. To protect the system partition continuously: 1.

Click Switch to partition mode in the upper right-hand corner of the Nonstop Backup window. The partitions that exist on the local hard disks will appear in the What to back up area. Select the system partition by selecting the appropriate check box.

You cannot select the partition to be protected as the destination for Nonstop Backup storage. The nonstop backup will get a default name, but if you would like to assign another name, type the name in the Backup name field. Click the Start now button to start protecting the selected partition s immediately. So you cannot use networked drives and such removable media as Iomega REV drive, etc. In many cases an external hard disk will be the best choice for Nonstop Backup data storage.

Some external hard disk drives are sold formatted FAT When an external hard disk is unavailable, the Nonstop Backup destination can be an internal disk, including a dynamic one. Please note that you cannot use as a Nonstop Backup storage a partition to be protected.

If your computer has a single hard disk drive with a single partition, but you want to use Acronis Nonstop Backup anyway, you can create Acronis Secure Zone and use it as the Nonstop Backup data storage. Before creating Acronis Nonstop Backup data storage, Acronis True Image Home checks whether the selected destination has enough free space. It multiplies the volume of data to be protected by 1.

If the free space on the destination satisfies this minimum storage size criterion, the destination can be used for storing Nonstop Backup data. Managing Acronis Nonstop Backup data storage Inevitably the Acronis Nonstop Backup data storage becomes full after a period of time which depends on the selected Nonstop Backup destination and the volume and composition of the data protected by Acronis Nonstop Backup.

When the free space on the storage becomes less than MB, the program will alert you. You can choose another destination without losing the previously backed up data. You will be able to recover the data backed up on the old storage. Note that after selecting a new destination, Acronis Nonstop Backup creates a new full backup of the data selected for protection by Nonstop Backup. One more way of managing the Acronis Nonstop Backup storage is by deleting the backup versions you no longer need.

Acronis True Image Home displays a window allowing you to select a period of time for deleting the backup versions created during that period. Select the required period and click OK. Be careful, as this operation destroys all data backed up by Acronis Nonstop Backup. When the system load rises to a critical level, Acronis Nonstop Backup receives the overload alarm from Windows and pauses itself.

The overload can be caused by running resource-intensive applications for example, performing a deep system scan with your antivirus software. In such a case Nonstop Backup automatically pauses and you cannot restart it. After pausing, Acronis Nonstop Backup gives the system one hour to relieve the load and then attempts to restart.

The automatic restart count for Acronis Nonstop Backup is 6. This means that after the first automatic restart Acronis Nonstop Backup will attempt to restart five more times with intervals of exactly one hour between attempts.

After the sixth unsuccessful attempt, Acronis Nonstop Backup will wait for the next calendar day. On the next day the automatic restart count will automatically reset. When not interfered with, Acronis Nonstop Backup performs six restart attempts per day. Restarting Acronis Nonstop Backup service will only reset the restart count to 0. If the system is still overloaded, Acronis Nonstop Backup will pause again. Rebooting the computer will reset the load and the restart count.

If the system overloads again, Acronis Nonstop Backup will pause. This may happen on restart of a paused Acronis Nonstop Backup if a considerable amount of protected data has been modified during the pause. For example, if you manually pause the Acronis Nonstop Backup that you use for protecting your system partition and then install a new application.

However, the process afcdpsrv. This happens because Acronis Nonstop Backup needs to check the backed up data against the data that have been modified during the pause to ensure protection continuity. If there was a considerable amount of data modified, the process may load CPU for some time.

After the check is done and all the modified data is backed up, Acronis Nonstop Backup goes back to normal. This limitation is due to the fact that Acronis Nonstop Backup needs the sparse file attribute to function for example, to perform autoconsolidation. The sparse file attribute was introduced in NTFS.

Acronis Nonstop Backup does not support network shares, mapped drives, NAS drives or any other network attached devices – neither for protection nor as a storage. Can I set up custom clean up rules for Acronis Nonstop Backup storage?

Instead, the program uses built-in backup autoconsolidation to ensure the optimal usage of storage space. Acronis True Image Home will keep daily backups for the last 30 days and weekly backups until all Nonstop Backup storage space is used. The first consolidation will take place after the Nonstop Backup has been working not less than 24 hours.

For more information see Using Acronis Nonstop Backup p. How does manual clean up of Acronis Nonstop Backup storage work? For example, you started Acronis Nonstop Backup of your system partition on August 15, It has been protecting your partition since that day. Let’s suppose that today is December 15, and your Acronis Nonstop Backup storage is almost full.

You decide to clean up unnecessary data to free up some storage space. Let’s suppose that you did not make important changes to the system during a period from September 1 to December 1. Select the period and click OK. The program will delete all backup versions created during the selected period and consolidate the remaining backup versions to keep their consistency.

Let’s consider some cases to explain which data is deleted and which data is kept. First let’s consider a system file, for example, notepad. It was backed up during the initial full backup on August 15 and naturally did not change since then.

In this case the file will remain in Nonstop Backup after clean up. And now suppose you installed a game on September 15, played for some time, and then uninstalled the game on October 5. In this case all files related to the game will be deleted from Nonstop Backup. One more example: you started to write your master’s thesis using Microsoft Word on November In this case, all thesis file versions backed up from November 16 to December 1 will be deleted and only the versions from December 2 to today will remain.

To sum up the above, all data modifications made during the selected period will be lost. All files that did not change since the initial full backup made on August 15 and all data modifications made before September 1 and after December 1 will be kept.

How can I pause Acronis Nonstop Backup? How can I turn off and delete Acronis Nonstop Backup? In addition to enhancing the backed up data security with replication, this feature allows you to copy a set of documents, for example, to a USB stick for working on them at home.

So now you can perform a normal backup and copy the same files to a USB stick or any local hard drive. You have the choice of making a reserve copy in the form of regular files in their native format, a zip compressed file, or a tib file optionally with password protection and encryption.

A password-protected reserve copy can be encrypted only if you choose to encrypt the main backup and an encryption key of the same length will be used for encrypting the reserve copy. You cannot make a reserve copy in the form of an incremental or differential backup, even in tib format. Also remember that you will pay for the enhanced convenience and increased security of your data by the time required for performing the operation, because normal backup and reserve copying are performed one after another and not simultaneously.

And now let us consider a case when you may need to make a reserve copy of your backup. Suppose you have worked hard on an urgent project all day and the deadline is tomorrow morning.

You decide to back up the results of the day’s work in Acronis Secure Zone and make a reserve copy of the project on a USB stick to finish the project at home. To make a reserve copy: 1. While configuring a backup, click the File backup options link, expand the Backup reserve copy item and then select the Create a reserve copy of my backups box if it is not selected in the default backup options. Choose how to duplicate the project file s on the USB stick.

If you need to save space, choose duplicating as a zip file. Click on the Set location Finish configuring your backup as usual. Click Back up now and do not forget to take the USB stick home. Please be aware that built-in support of zip files in Windows does not cover operations with multivolume zip archives, and zip archives exceeding 4GB in size or which contain files of more than 4 GB each.

You can save backup versions to different destinations by changing the backup destination when editing the settings of a selected backup. For example, after you save the initial full backup to an external USB hard drive, you can change the backup destination to a USB stick by editing the backup settings. The subsequent incremental or differential backups will be written to the USB stick.

You cannot use Acronis Secure Zone as one of the places for storing a part of backup versions belonging to the same backup “chain”, because such backup versions may be automatically deleted during automatic backup consolidation in Acronis Secure Zone. As a result, the backup chain will be corrupted. In addition, the feature does not work with FTP servers. One more useful aspect of this feature is the ability to split backups “on-the-fly”. Suppose you perform a backup to a hard disk and in the middle of the backup process Acronis True Image Home finds out that the disk to which you are backing up, does not have sufficient free space for completing the backup.

The program displays a message warning you that the disk is full. To choose the latter option, click Browse The Browse for Destination window appears. The left pane shows the storage locations available on your computer.

After you select a suitable location, assign a name for the file that will contain the remaining data being backed up. As was already mentioned, you can save full and incremental or differential backup versions to different destinations. For example, you can save the initial full backup to a local hard drive and then burn the subsequent incremental backup versions or differential backup versions that are an even better choice to DVDs.

It is also possible to save such backup versions to a network share. If backup versions belonging to the same backup “chain” have been saved to various destinations, Acronis True Image Home may prompt you for the locations of previous backup versions during data recovery.

This may occur when the selected backup version does not contain the files you want to recover or contains only a part of them. Click Browse for backup on the main screen. This will open a window where you can browse for backups on your computer. To add an existing backup to the backup list on the main screen, select the backup and click the Add to backup list button. In addition, you can exclude files meeting the criteria you specify.

To do this, select the Files matching the following criteria check box, enter the exclusion criterion, and then click Add.

By default, the program excludes from backups files with the following extensions:. You can enter explicit file names for exclusion from the backup: file. To delete a criterion, for example, added by mistake, click the Delete icon to the right of the criterion. To cancel changes in the items to be excluded, click Cancel. After you make changes in the items to be excluded, click OK to confirm the changes and exit from the File Exclusion window.

After you have installed the application, all options are set to the initial values. You can change them for your current backup operation only or for all backups that will be created in future. Note that disk backup options, file backup options and e-mail backup options are fully independent, and you should configure them separately.

If you want to reset all the modified options to their initial values that were set after the product installation, click the Reset to initial settings button. In this section Backup schemes The schemes allow you to optimize backup storage space usage, improve data storage reliability, and automatically delete the obsolete backup versions.

Custom p. Backup schemes and scheduler Scheduler settings for the default backup schemes single version and version chain are predefined. You should not change the default backup periodicity settings in the scheduler. For disk backups the setting is Monthly, and for file backups – Daily.

If you have selected one of the backup schemes and then change the periodicity settings for instance, from Monthly to Weekly , the backup scheme will automatically reset to a custom backup scheme with the incremental method selected. In this case the version chain will consist of a full backup version and a sequence of incremental backup versions.

The program creates a full backup version and overwrites it every time according to the specified schedule or when you run backup manually. Backup scheduler setting for disk backup: monthly. Result: you have a single up-to-date full backup version. Required storage space: minimal. Disk backup version chain At first the program creates the 1st full backup version. The version will be kept until you delete it manually. After that, according to the specified schedule or when you run backup manually the program creates: 1 full and 5 differential backup versions, then again 1 full and 5 differential backup versions and so on.

The versions will be stored for 6 months. After the period the program analyzes if the oldest backup versions except the 1st full version may be deleted. It depends on the minimum number of versions eight and version chains consistency.

The program deletes the oldest versions one by one after creating new versions with the same backup method for example, the oldest differential version will be deleted after creation of the newest differential version. First of all the oldest differential versions will be deleted, then – the oldest full version. Backup scheduler setting: monthly. Result: you have monthly backup versions for the last 6 months plus the initial full backup version that may be kept for a longer period.

Required storage space: depends on the number of versions and their sizes. File backup version chain According to the specified schedule or when you run backup manually the program creates: 1 full and 6 incremental backup versions, then again 1 full and 6 incremental versions and so on.

The versions will be stored for 1 month. After the period the program analyzes if the oldest backup versions may be deleted. It depends on the version chain consistency. Backup scheduler setting: daily. Result: you have backup versions for every day of the last month. The scheme can be based on creating full, differential or incremental backup versions. So first of all select one of the backup methods in the appropriate box.

Automatic cleanup is not available for this option. This is a more reliable but more space-consuming backup scheme. Incremental p. All versions that are older than the specified period will be automatically deleted. The oldest version chain will be deleted only if, after deletion, the age of the oldest version exceeds the specified period. When the number of versions exceeds the specified value, the oldest backup version will be automatically deleted.

When the number of version chains exceeds the specified value, the oldest backup version chain will be automatically deleted. After creating a new backup version, the program checks whether the total backup size exceeds the specified value.

If it’s true, the oldest backup version will be deleted. The first backup version option Often the first version of any backup is one of the most valuable versions.

This is true because it stores the initial data state for example, your system partition with recently installed Windows or some other stable data state for example, data after a successful virus check. Do not delete the first version of the backup – Select this check box to keep the initial data state. The program will create two initial full backup versions.

The first version will be excluded from the automatic cleanup, and will be stored until you delete it manually. If you select incremental or differential method, the first backup chain will start from the second full backup version. And only the third version of the backup will be incremental or differential one.

Automatic version consolidation Automatic consolidation of a backup is enabled by setting the overall limitations for the backup. By default there are no limits set and automatic consolidation is not performed. To enable automatic consolidation, you must select at least one of the limits and either leave its default value or change it according to your needs.

If limits are set, then after creating a backup version the program checks the backup for quota violations, such as exceeding a pre-set maximum number of gigabytes set aside for backup versions and, if any limitation is exceeded, consolidates the oldest backup versions. For example, if you’ve pre-set your backup to store 50GB of backup files and your backup versions reach 55GB, you have exceeded a quota and the system will respond automatically based on rules that you’ve already set.

This operation creates a temporary file and thus requires disk space. Consider also that the quota must be violated so that the program can detect the violation.

Therefore, to be able to consolidate the files, the program needs some space on the disk in excess of the backup quota. The extra amount of space can be estimated as the size of the largest backup version in the backup. In case of setting a limit on the number of backup versions, the actual number of versions can exceed the maximum number of versions by one.

This enables the program to detect quota violation and start consolidation. Similarly, if you pre-set a backup version storage period, for example, 30 days, the program will start consolidation when the oldest backup version is stored for 31 days.

Examples of custom schemes 1. You need to save your daily work results and want to be able to recover data state to any date for the last three weeks. On the main screen, click File backup. For more information see Backing up files and folders p. Click Turn on for the Schedule item. In the Scheduler window click Daily, and specify a start time for the backup operation. For example, if you finish your everyday work at 8 PM, specify this time or a little later 8. Click Version chain near the Backup scheme item Version chain is the default backup scheme.

In the File Backup Options window, make sure that the Backup scheme tab is selected. Choose Custom scheme instead of Version chain scheme. In the Backup method box, select Incremental from the drop down list. Click Create a full version after every [n] incremental versions, and type or select “6”. In that case, the program will first create the initial full backup version no matter how you set up a backup process, the first backup version will always be the full one , and then 6 incremental versions day by day.

Then, it will create 1 full version and 6 incremental versions again and so on. So every new full version will be created in exactly a week’s time. To limit the storage time for the versions, click Turn on automatic cleanup.

Click Delete version chains older than [n] days, type or select “21”, and click OK. In the File Backup window, check that all settings are correct and click Back up now. If you want your first backup to run only at the time you specified in the Scheduler, click the down arrow to the right of the Back up now button and select Later in the drop down list.

In addition, you want to use no more than GB of disk space to store the backup versions. On the main screen, click Disk and partition backup.

In the Disk Backup window, select your system partition usually C: , and specify the backup destination. For more information see Backing up partitions and disks p. In the Scheduler window click Monthly, and specify, for example, the 1st and 15th days of the month. This will result in a backup version in about every 2 weeks. Then specify a start time for the backup operation. In the Disk Backup Options window, make sure that the Backup scheme tab is selected.

In the Backup method box, select Differential from the drop down list. Click Create a full version after every [n] differential versions, and type or select “3”. In that case the program will first create the initial full backup version no matter how you set up a backup process, the first backup version will always be the full one , and then 3 differential versions, each one in about two weeks.

Then again a full version and 3 differential versions and so on. So every new full version will be created in two months. To limit storage space for the versions, click Turn on automatic cleanup.

When the total backup size exceeds GB, Acronis True Image Home will clean up the existing backup versions to make the remaining versions satisfy the size limit. The program will delete the oldest backup chain consisting of a full backup version and 3 differential backup versions. In the Disk Backup window, check that all settings are correct and click Back up now.

If you want your first backup to be run only at the time you specified in the Scheduler, click the down arrow to the right of the Back up now button and select Later in the drop down list.

You can configure disk or e-mail backup settings in a similar way. Click Turn on and schedule your backup if needed. Make sure that Create only incremental versions after the initial full version is selected. In that case the program will first create the initial full backup version no matter how you set up a backup process, the first backup version will always be the full one , and then a sequence of incremental versions.

The versions will be created by schedule if the scheduler is turned on and when you manually click Back up now on the appropriate backup box. Turn on and configure automatic consolidation if needed. Click OK. Note that the Back up unallocated space check box is available only when the Back up sector-by-sector check box is selected. By default the program copies only the hard disk sectors that contain data.

However, sometimes it might be useful to make a full sector-by-sector backup. For example, you have deleted some files by mistake and want to make a disk image before trying to undelete them, because sometimes undeleting may create problems in the file system. Please note that this mode increases processing time and usually results in a larger image file because it copies used and unused hard disk sectors.

By default, while performing sector-by-sector backup, unallocated space is not included into the backup file. Enabling this option will include all unallocated disk space into the backup. By default, there is no password protection for backups.

A password should consist of at least eight symbols and contain both letters in upper and lower cases preferably and numbers to make it more difficult to guess. AES is available with three key lengths — , and bits to balance performance and protection as desired. The bit encryption key is sufficient for most applications. The longer the key, the more secure your data.

However, the and bit long keys significantly slow down the backup process. Having specified the backup protection settings, click OK. Note that you cannot change the password of a password-protected backup after the backup was created. If you try to recover data from a password-protected backup, the program will ask for the password in a special window, allowing access only to authorized users. To create a new command or select a new batch file, click the Edit button.

Please do not try to execute interactive commands, i. These are not supported. In the Working directory field, type-in a path for command execution or select it from the list of previously entered paths.

In the Arguments field enter or select command execution arguments from the list. Disabling the Do not perform operations until the command execution is complete parameter enabled for Pre commands by default , will permit the backup process to run concurrently with your command execution.

The Abort the operation if the user command fails enabled by default parameter will abort the operation if any errors occur in command execution.

You can test a command you entered by clicking the Test command button. A single backup can also be split for burning to removable media. The default setting – Automatic. With this setting, Acronis True Image Home will act as follows.

You can try to free some additional space and continue or click Back and select another disk. Alternatively, you may select the desired file size from the drop-down list. The backup will then be split into multiple files of the specified size. When this option is enabled, the program will check the integrity of the recently created or supplemented backup version immediately after backup. Regular validation You can also schedule validation of your backups to ensure that they remain “healthy”.

The backup version is created at Its validation will run at If not, then the validation will not run. In a month, August 15, at The same will occur on September 15, and so on. You can change the default settings and specify your own schedule. This may be useful if you set a custom backup scheme with incremental backups.

For example, you may want to schedule validation of all backup versions the initial full backup version and subsequent incremental backup versions once a week.

You can also protect the tib backup reserve copy with a password. To do so, click Set password and specify a password for the reserve copy. A reserve copy always contains all the files selected for backup, that is, when creating a reserve copy the program always makes a full backup of the source data.

You cannot make a reserve copy in the form of an incremental or differential backup even in tib format. The redesigned interface simply ensures that the existing systems work faster and can be accessed much easier. To test the Beta version of Acronis True Image , you need to download the software from the download link, then you will be taken to the registration page where you must accept the Beta testing agreement and sign up with Acronis and you can proceed with the download.

The new user interface makes navigation and access of files even much faster than Acronis True Image Here are some of the coolest features on the new Acronis True Image – Acronis True Image maintains the wireless backup for IOS devices, and such backup can be locally saved or in the cloud. Similarly, you can access such tools remotely, but you need to download and install the Acronis app from any remote device you use in accessing such tools. With this movement, the files can be protected with the Bit AES Encryption- this is one of the highest encryption systems in the industry.

You can also restore your Operating system from the cloud, likewise, all applications and data items can be restored directly from the cloud , to an existing computer or a separate device. You can separate and restore specific data out of a group of data from the cloud, as well. Pros – It makes use of Cloud synchronization, instead of the local and mixed synchronization feature found in the version.

 

Acronis true image home 2010 manual .pdf free

 
Acronis True Image Home Topics manualzilla, manuals, Collection manuals_contributions; manuals; additional_collections. Addeddate Identifier PDF download. download 1 file. SINGLE PAGE PROCESSED JP2 ZIP download. download 1 file. EMBED (for replace.me hosted blogs and replace.me item tags). View and Download ACRONIS TRUE IMAGE HOME instruction manual online.